How you can Replace Brake Pads
Brake pads naturally wear out more than time. Luckily, it is not as hard to replace them as you could possibly assume. The tools that you need to have for this project include a lug wrench, c-clamp, adjustable or open wrench, Allen wrenches, hammer, in addition to a bungee cord. Any time you jack up your car, make sure that you’ve it supported by blocks or jack stands. It’s in no way safe to work on a car that is certainly supported by a jack only. The very first thing you need to do is get rid of the wheel. The lugs should be simple to take out, it’s best to perform so in the bottom up. Get much more details about замена передних тормозных колодок
Subsequent, to be able to get rid of the brake pads you will need to 1st remove the brake caliper. The brake caliper might be situated just above the lug bolts, sitting on prime in the brake disc. There is a bolt that keeps the caliper in spot. You can take away it simply using the appropriate wrench. You’ll find distinctive varieties of bolts that might be maintaining it in location, so it is an excellent thought to possess distinct wrenches handy. Now you may pull the caliper off by pulling straight up. You may must wiggle it a little to be able to loosen it. Now you are able to sit the caliper some place handy, or use your bungee cord to tie it up.
Now comes the time for you to remove the brake pads. They need to actually slide appropriate out devoid of providing you any problems. Don’t forget how they are attached though, since you’ll need to know this any time you are installing the fresh ones. For anyone who is driving an older vehicle, you could possibly need to tap them together with your hammer a little to get them unstuck. There may very well be some little metal tabs keeping the pads in spot too. If so, be sure to hang onto them; you will need them after you put the new pads in.
Now you’ll be able to quickly slide your new brake pads in, using the metal tabs to help keep them in place if applicable. Now with your new pads affixed, you must adjust the brake piston. This piece of equipment adjusts as your pads put on out in an effort to hold your brakes functioning effectively. To readjust it, you’ll need your c-clamp. Place the end on the clamp with the screw against the piston. The other end should really rest behind the caliper assembly. Now just gradually tighten the clamp until the piston has moved to a point exactly where you can insert the pads simply.
The subsequent thing you’ll want to do is slide the caliper assembly more than your new pads. Replace the bolts. At this point, it is an excellent notion to push down the brake petal several times in order that you might be assured of your brake pressure. Now you could replace the wheel along with the lug nuts. It’s a great thought to make sure that the lug nuts are really safe. At this point you might have successfully changed the brake pads in your car.