Saddle-stitching may sound like an unusual name for a book printing method that puts wire staples through sheets of paper, but Stapling is generally referred to as Stitching in the printing industry. The sheets are put on a saddle-like structure during the stitching process. Most prints are made using the Saddle-Stitch binding process. This procedure uses printed sheets that are folded and intertwined and stocked through folding lines using wires. From the outside, the staples move via folded crease and bind to the centre pages. The result is a paper looking very easy and competent. While its simple structure, saddle-stitch printing still presents a challenge for anyone new to graphic design. It is because the page configuration for  Saddle Stitch Booklet Printing  includes an approach that is distinct from other bound book styles.

Printing means the bookbinding process, in which wire staples are put via sheets of paper. The term for a saddle is coined from the look the collated sheets have during the stitching process when draped over a saddle-like apparatus. For most purposes, saddle-stitched books also need to be folded in half. Such soft folding or refolding is a difficult process when the bend is perpendicular to the spine, particularly if people don’t have a knife folder to do the job and try to get around with their buckle folder. 

Here are 5 things people should know about Saddle Stitch Booklet Printing:

  1. The minimum number of pages for Saddle-Stitching: By its very nature, Saddle-Stitching requires that the book’s page count be in multiples of four. It means that the minimum book size is either an 8-page self-cover book or a 4-page + cover book, generated from two folded sheets tucked together.
  2. The maximum number of pages that can be Saddle Stitched: The actual number of pages depends in large measure on the thickness of the paper used to construct the text. It is because only so many sheets of a given thickness can handle the staples. Too much bulk and a saddle-stitch book aren’t going to lie flat, it’ll be inclined to open spring. It is especially true for limited physical volume books.
  3. How often wire staples in the Saddle-Stitch Binding system are used: Two staples are used 99 percent of the time to protect the cover and the pages. Very large books, along the spine, may require more staples. Quite small books are mostly made with only one staple, such as those with a spine length of about 2 or less.
  4. Saddle-stitching may be used for books of very small or very large sizes: Saddle-stitching works well for almost all measurements of the book, including mini-books and books of excess thickness. The Saddle-Stitch method also works well with any Portrait, Landscape, or Square orientation of any book. 
  5. How is a Saddle-Stitched book constructed: The folded sheets would be tucked within each other and then stapled around the folded crease. That folded crease forms the spine of the book. Every single sheet of 11′′ x 17′′ folded in half produces four pages of the text. When the 11 “x 17” pages and the cover are typed, partially folded, and nestled together, the staples are joined together. Then the pages and cover are tightly folded together to make the book lightweight. The open edges are trimmed as necessary as a final step to keep the pages uniform and neat in appearance.

Now, it is clear that the one who is familiar with the 5 things related to Saddle Stitch Booklet Printingwill automatically understand how it makes any book or brochures make more professional by look.

Besides this, the one who is willing to keep their booklets, brochures, and catalogue quite different from other’s same products can approach us to take assistance from the services of saddle Stitch Booklet Printing. The main motto of this agency is to satisfy their customers.

If anyone has some questions regarding the services that can get in touch with us We are always ready to assist our customers.

Leave a Reply

Your email address will not be published. Required fields are marked *