Water Heater Maintenance – Make Sure You Pay Special Attention To The Heater During Spring Cleaning

You should always take certain precautions when using your water heater after a long interval. Many people make the mistake of thinking that they should only remove the water from the heater and turn the heater back on. Such an approach involves many risks.

Are you aware of the possibility of heat damage in the stove? This is particularly true of storage water heaters. Tankless water heaters may not have storage issues, but water may get stuck in the inner pipe.

If you blocked the entrance when you stopped using the oven, you may not be facing this problem. However, the water has stagnated inside the tank without a water heater for several months; is of course going to have an impact.

Before we move onto the next paragraph you should know about the Arizona Heating and Cooling Doctor owner Reginald Phillips started HVAC in 2006 as a helper installing units in a new home being built around the Tucson area. Before a year of doing so, he was the lead man running his own crew. He worked his way up through the industry to become one of the best service techs in the Tucson area. he opened one of the biggest companies in the Tucson as a there general manager running a company with over 15 techs he taught the trade to them where some of the techs are now business owners themselves. In 2017 he became the owner of Arizona Heating and Cooling with the idea to give homeowners great service at an affordable price. For more information visit theazhvacdoc.com

Plastic may not be vulnerable to water, but it will certainly suffer if it is filled with water for a long time. Even the slightest crack or weakness can cause the hose to malfunction when hot water passes through it.

If possible, it should be maintained by inspecting the radiator before use. If this is not possible, use the internet and get information about the heater model. You must know how to open the water heater. Once the radiator is open, you can operate it from a safe distance.

Do not try to play with the inside of the heater when it is operating. But if you can see the water filling the tank, and if you can see the condition of the tank, of course you will be able to judge whether maintenance is needed or not.

You should also remove the plug from the socket and look at the various pipes, cables and hoses on the radiator. Remember, you don’t have to be a rocket scientist to understand the condition of the radiator. If that sounds bad, it probably is. If you are not satisfied with your verification, you can continue to call the expert.

Remember, it’s always better to be safe than sorry when it comes to something that can cause tremendous damage. If you have more than one heater in the house, be sure to repeat this process for all heaters, whether you use it very often or not.

Tips for water heater maintenance – from your friendly plumber

One of the best tips you can do for your plumbing system is routine maintenance. Now, maintenance doesn’t have to be difficult and in this first article, I’m going to share with you one of the most common tips you can do on your own to keep your plumbing system running. Water Heater – These guys actually take a bit of abuse even though you might not see it. The constant expansion and contraction of the water tank can be the main factor in the failure of heaters. But don’t let that alarm you. By maintaining your water heater, you can almost double the life of the water heater in many cases.

Rinse your water tank at least once a year (actually recommended twice a year) to remove sediment buildup. Sediment causes the radiator burner to work harder than necessary. To do this, FIRST CLOSE THE GAS VALVE. Then use a garden hose and connect it to the hose faucet at the bottom of the water heater.

Route the hose to a nearby floor drain. Close the valve on the cold water side of the water heater. Now open the valve to which you have connected the hose. Let the water tank empty. To speed up the draining process, open the pressure relief valve on the side of the radiator by pulling on the handle, this acts as a vent and allows the radiator to run faster.

When the water heater appears to be drained, close the pressure relief valve (if you have opened it), open the cold water valve for 15 seconds while the lower valve is still open. After 15 seconds, close the cold water valve again and let the oven run out. This removes residual sediment at the bottom of the tank.

The tank is now unloaded. Close the lake and the relief valve. Open the cold water valve and allow the heater to fill before relighting the pilot. In some cases, you may experience low pressure from some of the taps. This is due to sediment in the pipes. Remove the clogged faucet aerator and clean it.

Related Posts