Slate is a metamorphic rock formed by sedimentary deposits along river beds. There are many different types of slate. Most installed slate tiles are unsafe in nature and somewhat difficult to shape. For these reasons, many people choose to seal their slate tiles with a shiny seal of the situation. Glossy seals look beautiful and also protect the slate from peeling, dirt, and contamination. Slate Seals Most terms for water-based wax seals. Although these seals look beautiful and highlight the natural beauty of the slate, they are short-lived. Although this seal will continue to protect the slate, over time it will find scratches and defects that will make the seal look lighter and lose its beautiful shiny shape. To restore slate tiles to their beautiful shape, the wax seal must be removed from the surface of the slate. You will need a water base floor tile stripping machine to remove the wax seal. Water-based floor nodules can be found at most door supply stores. Also, large box stores have water-based floor tile stripping machines, but they are generally less efficient than professional stripper generator supply stores. Nude with water in proportion to the finished label. Wear rubber gloves and rain suits as the most effective chemical to remove the floor from your skin. Water-based floor strippers usually do not have strong fumes, but if you are sensitive to chemical contamination, you may want to consider wearing breathable. Apply to sleeper tiles with a scraper pad or mop and leave on tiles and grout. Do not allow the surface to be removed. Leave the seller there until he starts rubbing the tiles and grout. When you leave the floor stripper on the tiles and grout, you can start cleaning the sealer coating with an aggressive scrub pad. Do not use any type of steel wool or metal pad that may scratch the tile surface. Always check the surface you are going to clean to make sure that your scrub pad will not permanently scratch the surface of your slate tile. You may have noticed that the sealer can be removed from the surface of the tile with minimal scrubbing, but some extra shrubs will be needed to seal the grout. Keep rubbing until the seal is completely removed from the grill. When you seal the seller with tiles and remove grout tiles and grout emulsified cell sellers and more floor strippers from the storage space. Then use a mop and water to remove the stripper in tile and grout cleaning. After completing this process of slate cleaning and resealing you can see that there is still some seal on the slate tiles and especially the grout. This process may need to be repeated until the maximum amount of wax is removed. When you separate the seller from the tile and grout, you should make sure that the slate tiles are clean and neutral before sealing any conditions.