EXTERIOR LIGHTING Maintenance Strategies

Exterior lighting enhances your home’s curb appeal at night and makes arriving home safer following dark. It is welcoming and inviting to each you and your guests.

Properly placed outside lighting also can extend the time you’ll be capable of enjoy outside living spaces year-round at your home within the San Diego location. To maintain yours operating at its very best, you will need to execute regular lighting upkeep to keep your system in leading shape.

Below we’ll go over what you should be doing in the course of your inspection.


Outdoor lighting is installed for safety and design purposes, however it only does its job when all of your fixtures are operating as intended.

Lots of items can wreak havoc on exterior lighting. Natural elements like climate and vegetation growth are large culprits, but people and animals could be also.

Do not be concerned even though. Typical outdoor lighting maintenance will help preserve your exterior lighting fixtures shining brighter and longer.

It is also a great time to check out ways to save money on lighting. Including by upgrading your bulbs to LEDs or other energy-efficient lightbulbs.

Here are some things to look out for:


The internal reflector is definitely the part in the lamp that surrounds the bulb. This area is there to guard the bulb, but additionally to assist reflect the light out into the preferred direction. Wiping off the internal reflectors will assistance take away any foreign supplies allowing them to do their job.

Lenses can turn out to be coated by dirt, debris, spider webs, and challenging water spots which will block the light emitting from the lamp. Hard water spots may also trigger the lens to become dull and cloudy looking. Cleaning the lenses on your fixtures will support restore their brightness.


Over time, fixtures can turn out to be blocked or partially covered by grass as well as other plants, mulch, leaves, dirt, and mud. Even a smaller amount of blockage can reduce the lumens a light provides off or block the light in particular directions.

Trim or reduce back any vegetation blocking illumination of one’s lights. This could mean plants which are actually expanding more than your fixtures, or simply expanding tall adequate to block your lighting from reaching the region intended to become lit up.


Verify your outdoor lighting fixtures to view if they’ve been compromised by corrosion, damage, breakage, or dents. Also check whether the wires have turn into disconnected from the fixture.

Compromised fixtures may have ceased to be water protected. Broken or cracked fixtures may also cut people or animals who knock into them when passing by.

Any fixtures suffering considerable damage really should be replaced, even if the light continues to work. At times it may be tricky obtaining the exact very same fixture to replace yours with. If that’s the case, a lighting professional’s assistance could be needed in the event the new light fixture needs additional wattage than your old one.


During your maintenance check, replace any bulbs that aren’t working. This can be a good time to look at upgrading to a lot more energy-efficient bulbs or LED lighting in case you haven’t already.

All bulbs can develop tired and start out to drop their brightness. Look for locations in your lighting installation that appear dimmer than other places. Think about replacing these bulbs prior to they burn out entirely, in particular if they are lighting up walking pathways, methods or modifications in elevation that will lead to a hazard.

Make sure FIXTURES ARE Appropriately POSITIONED

Fixtures can get knocked more than or pushed out of alignment. This can take place for many reasons, for instance trees limbs falling, becoming jostled by lawn care equipment, or children playing in the yard.

So, check for fixtures which have been pushed over or that have moved position as a result of modifications inside the ground soil.

Hold the purpose the lights had been installed in mind when making sure the lights are re-positioned pointing within the ideal direction. Some lights had been created to be pointing upward, but some are installed to highlight an location.


The wiring running to and among your landscape lighting should be underground. Having the wires buried keeps people, pets, and gardeners from tripping over it or damaging your electrical wire. It also appears tidier.

Provided any exposed wiring you find seems to become undamaged or uncompromised, you are able to rebury them. Nevertheless, broken or compromised wiring needs to be repaired or replaced prior to it is reburied. This can be simply because wiring that is not sealed properly is just not waterproof and may result in critical problems when exposed to water.


It is possible to reduce down any unnecessary wear and tear in your exterior lights by getting your lights set on a timer or timers. By doing so, you’ll be able to ensure your lights aren’t on after they are not needed.

You can set your lights so they all come on as quickly as it begins to get dark, and turn off when it starts to get light. You can also set your timers so only some are on for the duration of dawn and dusk, when there’s partial sunlight, together with the rest of your lights only staying on for the duration of full darkness.

Exit mobile version