Home water filtration has gone from being a luxury item to practically a necessity. With news of heavy metal contamination from aging infrastructure and other common issues in water treatment, more homeowners are starting to realize that even crystal clear water cannot always be trusted. Adding a water filter to your home, like the Everpure H104, can make a huge difference to the quality of your water without changing the appearance of your kitchen at all.

Everpure water filtration systems are designed to be installed under the sink. Many Everpure systems require the addition of a dedicated filtered water faucet to your existing setup. While many sinks feature convenient punch outs for adding secondary faucets or soap dispensers, many homeowners do not want to modify their existing setup.

That is what is so great about the H104. Instead of requiring you to add another faucet, these filters dispense their filtered water using the cold water side of your existing faucet. This means you can enjoy your clean, filtered water without having to change anything about the appearance of your kitchen.

These systems are also very easy to install. You won’t need to hire a professional as long as you have a few basic hand tools. The Everpure H104 requires a wrench, Philips head screwdriver, a pencil, a utility knife, and a tape measure. The first step is to shut off the water under your sink. Then all you have to do is screw the filter head at an appropriate height to allow for filter changes and attach the adapter to your cold water line. Once this is complete, you just cut and attach your water lines and screw the filter cartridge into place. Once you have completed the installation you can reopen the cold water line and run the faucet for a few minutes to purge air from the lines.

Once you have completed your installation, your filter cartridge will be able to operate for a full year or until it has filtered 1000 gallons of water. These filters use Everpure’s proprietary Micro-Pure filter media to filter your drinking water down to 0.5 microns. That means these filters can remove particles from your water as small as 1/10th the thickness of a human hair. This is all because of the carbon-based filter media, which acts as a sponge for tiny particles while water passes through it.

The Everpure H104’s large capacity means that the cartridge should last for at least a year. You may notice a decrease in terms of water flow before then, you may need to replace your cartridge sooner. Luckily, the replacement process is as simple as changing a lightbulb and it will only take a minute or two to get your filter ready for another year of work. Because many Everpure systems use the same filter head hardware, you can always upgrade to a cartridge with a larger filter capacity in the event that you need more than one H104 cartridge annually.

So if you are ready to enjoy the convenience of always having refreshing, filtered water on tap, you can find the Everpure H104 and other amazing Everpure systems at efilters. After years of offering a huge range of filtration systems, the team at efilters trust Everpure because these systems are both easy to use and offer incredible results. If you have any questions about their inventory or water filtration systems in general, you can reach them at 1-866-283-9919 or send them an email to [email protected]

For more information about Everpure Water Filtration Systems and Home Drinking Water Filtration Please visit : Efilters.

Leave a Reply

Your email address will not be published. Required fields are marked *